Gas Stove Igniter Replacement Cost: Parts, Labor, and Total Price Ranges

Typical Gas Stove Igniter Replacement Cost by Repair Type

A typical gas stove igniter replacement cost ranges from about $150 to $400 when one burner igniter is replaced by a professional. The low end generally reflects an inexpensive part and accessible installation; the high end includes a costlier igniter, more labor, or both. A minimum service charge can bring a small repair close to the upper end of that range.

The part usually represents roughly $20 to $150 of the total. Common burner igniters are often near the lower portion of that span, while sealed-cooktop, specialty, or brand-specific parts can cost more. Labor commonly adds about $80 to $250, although some technicians charge a separate trip fee or bill in hourly increments. Published rates vary enough that a written quote is more reliable than a national average.

The most useful estimate is the installed price, not the price of the igniter alone. Ask whether the quote includes diagnosis, the part, labor, travel, and testing after installation. If the technician must remove a sealed cooktop or work around a difficult access panel, the final bill may exceed an initial estimate.

What Drives the Price of the Igniter Part

Burner type is a major cost variable. Removable-grate cooktops commonly use individual electrodes that are relatively easy to source. Sealed glass or ceramic gas cooktops may use an integrated igniter assembly or require removal of the entire cooking surface, so both the component and installation can cost more. Exact pricing depends on the appliance model.

The manufacturer and parts distribution also matter. Parts for current, widely sold models are often less expensive and easier to obtain than parts for discontinued, imported, or premium appliances. An original-equipment part may cost more than a compatible aftermarket part, but availability and fit can differ. Before ordering, confirm the model number and whether the part includes wiring, connectors, or mounting hardware.

Damage around the igniter can change the parts bill. A cracked electrode, corroded terminal, loose connection, or damaged wire may require more than the igniter itself. If the spark module or another electrical component is faulty, replacing only the visible igniter may not solve the problem. A technician should identify the failed component before the final price is set.

How Labor and Service Charges Affect the Total

Labor depends on access and the technician's pricing structure. A straightforward replacement on an exposed burner may take less time than work on a sealed cooktop, where the top must be lifted or removed. Some companies quote a flat repair price, while others combine an hourly rate with a separate travel or dispatch fee.

A minimum service charge can be a large share of a small repair. For example, a $75 to $150 call-out fee may nearly equal the cost of the part. That does not necessarily mean the repair is overpriced; it reflects the time needed to travel, diagnose the appliance, and guarantee the work. Ask what is included before authorizing the job.

Labor can also rise if corrosion, food residue, or previous repairs make removal difficult. Additional wiring, a new connector, or a replacement spark module is normally billed separately. A clear estimate should identify the base charge, the part price, expected labor, and any possible extra charges rather than presenting one unexplained total.

When the Repair Bill Can Be Higher

The first important distinction is whether the range uses a pilot light or electronic ignition. Older appliances with a standing pilot may not have the same replaceable electric igniter as a modern burner. A thermocouple, pilot assembly, or gas-valve issue can produce similar symptoms but requires a different diagnosis and price.

Multiple burners that fail to spark may point to a shared spark module, control board, wiring problem, or power issue rather than several bad igniters. Replacing each electrode individually can become expensive if the common component is the actual fault. Conversely, one burner that fails while the others spark normally is more likely to involve that burner's igniter or its local wiring.

Moisture, grease, and misalignment can interrupt a spark without a failed part. If cleaning, drying, and correctly repositioning removable burner components restores ignition, the cost may be limited to a service call or avoided altogether. Do not repeatedly operate a burner that smells strongly of gas or fails to light; contact a qualified appliance or gas technician.

Repair Cost Compared with Replacing the Stove

A single igniter repair is usually far less expensive than replacing an entire gas range, but the comparison changes when several components are failing or the appliance is old. If the repair approaches the value of a comparable used or entry-level range, replacement may be reasonable. There is no universal cutoff, because appliance quality, installation costs, and local prices vary.

Consider the age and condition of the range, the availability of replacement parts, and whether other burners, knobs, grates, or controls are worn. A newer range with one failed igniter is often a good repair candidate. An older range with repeated ignition problems, damaged cooktop surfaces, or unavailable parts may be less economical to maintain.

Before deciding, request an itemized estimate and ask whether the part and labor are warranted. Compare that figure with the cost of a similar new range, including delivery, removal of the old appliance, any required gas-connection work, and local code requirements. A licensed professional should handle gas connections and verify safe operation after the repair.